top of page
Technical drawing of a DiCAN-equipped snowplow.

DiCAN

DiCAN equipment for snowplow trucks

DiCAN equips winter maintenance trucks to measure pavement temperature, track blade commands and keep a camera clear on route. In Québec, Électronique SSB is an authorized DiCAN distributor. InstallaFex provides on-vehicle installation as an authorized installer.

What do operators and dispatchers need to know?

An operator may need the pavement temperature before spreading or a visual guide for the wing plow. Back at dispatch, the question may be where on the route the operator lowered the blade. Knowing who needs the information helps determine which sensor, cab display and telematics connection to specify.

Choosing equipment for your snowplow

Guardian shows air and pavement temperatures to help operators decide when to spread material. Plow Pilot reports blade raise and lower commands to a compatible telematics platform. When brine obscures the rear camera, Camera Wash lets the driver wash the lens from the cab.

The DiCAN product family on a plow truck

Mounted on the exterior mirror bracket, Guardian measures air and pavement temperature. The two readings help operators make spreading decisions. Guardian+ adds humidity and dew point. Tell us whether you want readings in the cab or on a compatible telematics platform.

View the Guardian guide

Plow Pilot reads blade lift and lower signals and can send those changes to the truck’s GPS telematics system. Dispatchers can review when the operator used the controls along a route. The signal records the operator’s command.

View the Plow Pilot guide

LaserLine projects a green spot onto the pavement ahead of the vehicle to indicate the path of the wing plow’s outer edge. The mounting point and alignment depend on the wing and the operator’s view from the driver’s seat.

View the LaserLine guide

A splash of brine can obscure a rear camera in the middle of a shift. The operator starts a wash cycle from the cab. A version with an air supply also dries the lens. The choice depends on the camera, its location and the connections available on the truck.

View the Camera Wash guide

For a new installation or a retrofit, send a photo of the exterior mirror bracket, blade controls or camera you want to address. Include the vehicle model and existing telematics platform so Électronique SSB can check the parts required and what you can reuse.

Plan the installation

InstallaFex plans the installation with your shop. Depending on the system, checks cover the cab reading, the blade signal on the platform, the laser spot location or the camera wash cycle. The first truck provides a reference for the rest of the fleet.

Explore telematics integration

What does your next truck need?

Tell us the task, truck model and equipment you already have. For a mixed fleet, include how many vehicles share the same blade controls, cameras or telematics devices.

bottom of page